Point Grey Dragonfly Express Camera driver for Windows 7 - Point Grey Dragonfly Express Camera driver from P

Point Grey Dragonfly Express Camera 1.1.1.21

Point Grey Dragonfly Express Camera driver from Point Grey for OS Independent

Point Grey Dragonfly Express Camera driver from Point Grey for OS Independent

Publisher review for Point Grey Dragonfly Express Camera 1.1.1.21:

Before install Point Grey Dragonfly Express Camera 1.1.1.21you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Point Grey Dragonfly Express Camera . We recommend to always use most recent version of a driver.

Fixes:Enhancements:
- 19394 - Initial firmware release for camera
Firmware update:[1] Bug 3214: After power cycle, first frames grabbed are corrupted
- image transmission now delayed for 250ms after power-up except in async trigger modes 
[2] Bug 4159: Config ROM model textual descriptor change to "Dragonfly Express DX-BW" and "Dragonfly Express DX-COL"
[3] Bug 3460: First exposed image sometimes thrown away and not streamed to PC
- always throw away the first exposed image acquired when exiting async trigger mode
[4] Bug 3500: Toggling between trigger modes 0 and 14 cause image to be streamed
[5] Bug 3886: Images streamed when iso disabled / trigger enabled
[6] Bug 3709: Power failure results in transmit failure when starting camera in Format_7
[7] Bug 4238: Frame buffer state machine freeze-up
[8] Bug 3440: Embedded image info may not apply to current image
- shutter, gain, brightness, and white-balance should almost always be correct.
- GPIO state and strobe pattern counter are still incorrect.
- shutter value transmitted does not have any of the control bits set (ie: only reports Presence and Value)
[9] Bug 3658: Strobe control not showing as present when pin configured as input
- Strobe control reported as present for all pins capable of strobe
- On_Off_Inq bit of the Strobe_X_Inq register set to zero when the associated pin is currently set as an input.
[10] Format_7 now picks most pessimistic nominal frame rate (rate is achievable regardless of ROI position)

Operating system:
OS Independent